ytshih/ios2024
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
5b1cd5e1cf298cd7a1160927c618a780ca8a86cd
ios2024/usr/local/nachos/info/gcc.info-20

1169 lines
50 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters
This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
This is Info file gcc.info, produced by Makeinfo version 1.68 from the
input file ../../gcc-2.95.2/gcc/gcc.texi.
INFO-DIR-SECTION Programming
START-INFO-DIR-ENTRY
* gcc: (gcc). The GNU Compiler Collection.
END-INFO-DIR-ENTRY
This file documents the use and the internals of the GNU compiler.
Published by the Free Software Foundation 59 Temple Place - Suite 330
Boston, MA 02111-1307 USA
Copyright (C) 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
1999 Free Software Foundation, Inc.
Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.
Permission is granted to copy and distribute modified versions of
this manual under the conditions for verbatim copying, provided also
that the sections entitled "GNU General Public License" and "Funding
for Free Software" are included exactly as in the original, and
provided that the entire resulting derived work is distributed under
the terms of a permission notice identical to this one.
Permission is granted to copy and distribute translations of this
manual into another language, under the above conditions for modified
versions, except that the sections entitled "GNU General Public
License" and "Funding for Free Software", and this permission notice,
may be included in translations approved by the Free Software Foundation
instead of in the original English.

File: gcc.info, Node: Dependent Patterns, Next: Jump Patterns, Prev: Pattern Ordering, Up: Machine Desc
Interdependence of Patterns
===========================
Every machine description must have a named pattern for each of the
conditional branch names `bCOND'. The recognition template must always
have the form
(set (pc)
(if_then_else (COND (cc0) (const_int 0))
(label_ref (match_operand 0 "" ""))
(pc)))
In addition, every machine description must have an anonymous pattern
for each of the possible reverse-conditional branches. Their templates
look like
(set (pc)
(if_then_else (COND (cc0) (const_int 0))
(pc)
(label_ref (match_operand 0 "" ""))))
They are necessary because jump optimization can turn direct-conditional
branches into reverse-conditional branches.
It is often convenient to use the `match_operator' construct to
reduce the number of patterns that must be specified for branches. For
example,
(define_insn ""
[(set (pc)
(if_then_else (match_operator 0 "comparison_operator"
[(cc0) (const_int 0)])
(pc)
(label_ref (match_operand 1 "" ""))))]
"CONDITION"
"...")
In some cases machines support instructions identical except for the
machine mode of one or more operands. For example, there may be
"sign-extend halfword" and "sign-extend byte" instructions whose
patterns are
(set (match_operand:SI 0 ...)
(extend:SI (match_operand:HI 1 ...)))
(set (match_operand:SI 0 ...)
(extend:SI (match_operand:QI 1 ...)))
Constant integers do not specify a machine mode, so an instruction to
extend a constant value could match either pattern. The pattern it
actually will match is the one that appears first in the file. For
correct results, this must be the one for the widest possible mode
(`HImode', here). If the pattern matches the `QImode' instruction, the
results will be incorrect if the constant value does not actually fit
that mode.
Such instructions to extend constants are rarely generated because
they are optimized away, but they do occasionally happen in nonoptimized
compilations.
If a constraint in a pattern allows a constant, the reload pass may
replace a register with a constant permitted by the constraint in some
cases. Similarly for memory references. Because of this substitution,
you should not provide separate patterns for increment and decrement
instructions. Instead, they should be generated from the same pattern
that supports register-register add insns by examining the operands and
generating the appropriate machine instruction.

File: gcc.info, Node: Jump Patterns, Next: Insn Canonicalizations, Prev: Dependent Patterns, Up: Machine Desc
Defining Jump Instruction Patterns
==================================
For most machines, GNU CC assumes that the machine has a condition
code. A comparison insn sets the condition code, recording the results
of both signed and unsigned comparison of the given operands. A
separate branch insn tests the condition code and branches or not
according its value. The branch insns come in distinct signed and
unsigned flavors. Many common machines, such as the Vax, the 68000 and
the 32000, work this way.
Some machines have distinct signed and unsigned compare
instructions, and only one set of conditional branch instructions. The
easiest way to handle these machines is to treat them just like the
others until the final stage where assembly code is written. At this
time, when outputting code for the compare instruction, peek ahead at
the following branch using `next_cc0_user (insn)'. (The variable
`insn' refers to the insn being output, in the output-writing code in
an instruction pattern.) If the RTL says that is an unsigned branch,
output an unsigned compare; otherwise output a signed compare. When
the branch itself is output, you can treat signed and unsigned branches
identically.
The reason you can do this is that GNU CC always generates a pair of
consecutive RTL insns, possibly separated by `note' insns, one to set
the condition code and one to test it, and keeps the pair inviolate
until the end.
To go with this technique, you must define the machine-description
macro `NOTICE_UPDATE_CC' to do `CC_STATUS_INIT'; in other words, no
compare instruction is superfluous.
Some machines have compare-and-branch instructions and no condition
code. A similar technique works for them. When it is time to "output"
a compare instruction, record its operands in two static variables.
When outputting the branch-on-condition-code instruction that follows,
actually output a compare-and-branch instruction that uses the
remembered operands.
It also works to define patterns for compare-and-branch instructions.
In optimizing compilation, the pair of compare and branch instructions
will be combined according to these patterns. But this does not happen
if optimization is not requested. So you must use one of the solutions
above in addition to any special patterns you define.
In many RISC machines, most instructions do not affect the condition
code and there may not even be a separate condition code register. On
these machines, the restriction that the definition and use of the
condition code be adjacent insns is not necessary and can prevent
important optimizations. For example, on the IBM RS/6000, there is a
delay for taken branches unless the condition code register is set three
instructions earlier than the conditional branch. The instruction
scheduler cannot perform this optimization if it is not permitted to
separate the definition and use of the condition code register.
On these machines, do not use `(cc0)', but instead use a register to
represent the condition code. If there is a specific condition code
register in the machine, use a hard register. If the condition code or
comparison result can be placed in any general register, or if there are
multiple condition registers, use a pseudo register.
On some machines, the type of branch instruction generated may
depend on the way the condition code was produced; for example, on the
68k and Sparc, setting the condition code directly from an add or
subtract instruction does not clear the overflow bit the way that a test
instruction does, so a different branch instruction must be used for
some conditional branches. For machines that use `(cc0)', the set and
use of the condition code must be adjacent (separated only by `note'
insns) allowing flags in `cc_status' to be used. (*Note Condition
Code::.) Also, the comparison and branch insns can be located from
each other by using the functions `prev_cc0_setter' and `next_cc0_user'.
However, this is not true on machines that do not use `(cc0)'. On
those machines, no assumptions can be made about the adjacency of the
compare and branch insns and the above methods cannot be used. Instead,
we use the machine mode of the condition code register to record
different formats of the condition code register.
Registers used to store the condition code value should have a mode
that is in class `MODE_CC'. Normally, it will be `CCmode'. If
additional modes are required (as for the add example mentioned above in
the Sparc), define the macro `EXTRA_CC_MODES' to list the additional
modes required (*note Condition Code::.). Also define `EXTRA_CC_NAMES'
to list the names of those modes and `SELECT_CC_MODE' to choose a mode
given an operand of a compare.
If it is known during RTL generation that a different mode will be
required (for example, if the machine has separate compare instructions
for signed and unsigned quantities, like most IBM processors), they can
be specified at that time.
If the cases that require different modes would be made by
instruction combination, the macro `SELECT_CC_MODE' determines which
machine mode should be used for the comparison result. The patterns
should be written using that mode. To support the case of the add on
the Sparc discussed above, we have the pattern
(define_insn ""
[(set (reg:CC_NOOV 0)
(compare:CC_NOOV
(plus:SI (match_operand:SI 0 "register_operand" "%r")
(match_operand:SI 1 "arith_operand" "rI"))
(const_int 0)))]
""
"...")
The `SELECT_CC_MODE' macro on the Sparc returns `CC_NOOVmode' for
comparisons whose argument is a `plus'.

File: gcc.info, Node: Insn Canonicalizations, Next: Peephole Definitions, Prev: Jump Patterns, Up: Machine Desc
Canonicalization of Instructions
================================
There are often cases where multiple RTL expressions could represent
an operation performed by a single machine instruction. This situation
is most commonly encountered with logical, branch, and
multiply-accumulate instructions. In such cases, the compiler attempts
to convert these multiple RTL expressions into a single canonical form
to reduce the number of insn patterns required.
In addition to algebraic simplifications, following canonicalizations
are performed:
* For commutative and comparison operators, a constant is always
made the second operand. If a machine only supports a constant as
the second operand, only patterns that match a constant in the
second operand need be supplied.
For these operators, if only one operand is a `neg', `not',
`mult', `plus', or `minus' expression, it will be the first
operand.
* For the `compare' operator, a constant is always the second operand
on machines where `cc0' is used (*note Jump Patterns::.). On other
machines, there are rare cases where the compiler might want to
construct a `compare' with a constant as the first operand.
However, these cases are not common enough for it to be worthwhile
to provide a pattern matching a constant as the first operand
unless the machine actually has such an instruction.
An operand of `neg', `not', `mult', `plus', or `minus' is made the
first operand under the same conditions as above.
* `(minus X (const_int N))' is converted to `(plus X (const_int
-N))'.
* Within address computations (i.e., inside `mem'), a left shift is
converted into the appropriate multiplication by a power of two.
* De`Morgan's Law is used to move bitwise negation inside a bitwise
logical-and or logical-or operation. If this results in only one
operand being a `not' expression, it will be the first one.
A machine that has an instruction that performs a bitwise
logical-and of one operand with the bitwise negation of the other
should specify the pattern for that instruction as
(define_insn ""
[(set (match_operand:M 0 ...)
(and:M (not:M (match_operand:M 1 ...))
(match_operand:M 2 ...)))]
"..."
"...")
Similarly, a pattern for a "NAND" instruction should be written
(define_insn ""
[(set (match_operand:M 0 ...)
(ior:M (not:M (match_operand:M 1 ...))
(not:M (match_operand:M 2 ...))))]
"..."
"...")
In both cases, it is not necessary to include patterns for the many
logically equivalent RTL expressions.
* The only possible RTL expressions involving both bitwise
exclusive-or and bitwise negation are `(xor:M X Y)' and `(not:M
(xor:M X Y))'.
* The sum of three items, one of which is a constant, will only
appear in the form
(plus:M (plus:M X Y) CONSTANT)
* On machines that do not use `cc0', `(compare X (const_int 0))'
will be converted to X.
* Equality comparisons of a group of bits (usually a single bit)
with zero will be written using `zero_extract' rather than the
equivalent `and' or `sign_extract' operations.

File: gcc.info, Node: Peephole Definitions, Next: Expander Definitions, Prev: Insn Canonicalizations, Up: Machine Desc
Machine-Specific Peephole Optimizers
====================================
In addition to instruction patterns the `md' file may contain
definitions of machine-specific peephole optimizations.
The combiner does not notice certain peephole optimizations when the
data flow in the program does not suggest that it should try them. For
example, sometimes two consecutive insns related in purpose can be
combined even though the second one does not appear to use a register
computed in the first one. A machine-specific peephole optimizer can
detect such opportunities.
A definition looks like this:
(define_peephole
[INSN-PATTERN-1
INSN-PATTERN-2
...]
"CONDITION"
"TEMPLATE"
"OPTIONAL INSN-ATTRIBUTES")
The last string operand may be omitted if you are not using any
machine-specific information in this machine description. If present,
it must obey the same rules as in a `define_insn'.
In this skeleton, INSN-PATTERN-1 and so on are patterns to match
consecutive insns. The optimization applies to a sequence of insns when
INSN-PATTERN-1 matches the first one, INSN-PATTERN-2 matches the next,
and so on.
Each of the insns matched by a peephole must also match a
`define_insn'. Peepholes are checked only at the last stage just
before code generation, and only optionally. Therefore, any insn which
would match a peephole but no `define_insn' will cause a crash in code
generation in an unoptimized compilation, or at various optimization
stages.
The operands of the insns are matched with `match_operands',
`match_operator', and `match_dup', as usual. What is not usual is that
the operand numbers apply to all the insn patterns in the definition.
So, you can check for identical operands in two insns by using
`match_operand' in one insn and `match_dup' in the other.
The operand constraints used in `match_operand' patterns do not have
any direct effect on the applicability of the peephole, but they will
be validated afterward, so make sure your constraints are general enough
to apply whenever the peephole matches. If the peephole matches but
the constraints are not satisfied, the compiler will crash.
It is safe to omit constraints in all the operands of the peephole;
or you can write constraints which serve as a double-check on the
criteria previously tested.
Once a sequence of insns matches the patterns, the CONDITION is
checked. This is a C expression which makes the final decision whether
to perform the optimization (we do so if the expression is nonzero). If
CONDITION is omitted (in other words, the string is empty) then the
optimization is applied to every sequence of insns that matches the
patterns.
The defined peephole optimizations are applied after register
allocation is complete. Therefore, the peephole definition can check
which operands have ended up in which kinds of registers, just by
looking at the operands.
The way to refer to the operands in CONDITION is to write
`operands[I]' for operand number I (as matched by `(match_operand I
...)'). Use the variable `insn' to refer to the last of the insns
being matched; use `prev_active_insn' to find the preceding insns.
When optimizing computations with intermediate results, you can use
CONDITION to match only when the intermediate results are not used
elsewhere. Use the C expression `dead_or_set_p (INSN, OP)', where INSN
is the insn in which you expect the value to be used for the last time
(from the value of `insn', together with use of `prev_nonnote_insn'),
and OP is the intermediate value (from `operands[I]').
Applying the optimization means replacing the sequence of insns with
one new insn. The TEMPLATE controls ultimate output of assembler code
for this combined insn. It works exactly like the template of a
`define_insn'. Operand numbers in this template are the same ones used
in matching the original sequence of insns.
The result of a defined peephole optimizer does not need to match
any of the insn patterns in the machine description; it does not even
have an opportunity to match them. The peephole optimizer definition
itself serves as the insn pattern to control how the insn is output.
Defined peephole optimizers are run as assembler code is being
output, so the insns they produce are never combined or rearranged in
any way.
Here is an example, taken from the 68000 machine description:
(define_peephole
[(set (reg:SI 15) (plus:SI (reg:SI 15) (const_int 4)))
(set (match_operand:DF 0 "register_operand" "=f")
(match_operand:DF 1 "register_operand" "ad"))]
"FP_REG_P (operands[0]) && ! FP_REG_P (operands[1])"
"*
{
rtx xoperands[2];
xoperands[1] = gen_rtx (REG, SImode, REGNO (operands[1]) + 1);
#ifdef MOTOROLA
output_asm_insn (\"move.l %1,(sp)\", xoperands);
output_asm_insn (\"move.l %1,-(sp)\", operands);
return \"fmove.d (sp)+,%0\";
#else
output_asm_insn (\"movel %1,sp@\", xoperands);
output_asm_insn (\"movel %1,sp@-\", operands);
return \"fmoved sp@+,%0\";
#endif
}
")
The effect of this optimization is to change
jbsr _foobar
addql #4,sp
movel d1,sp@-
movel d0,sp@-
fmoved sp@+,fp0
into
jbsr _foobar
movel d1,sp@
movel d0,sp@-
fmoved sp@+,fp0
INSN-PATTERN-1 and so on look *almost* like the second operand of
`define_insn'. There is one important difference: the second operand
of `define_insn' consists of one or more RTX's enclosed in square
brackets. Usually, there is only one: then the same action can be
written as an element of a `define_peephole'. But when there are
multiple actions in a `define_insn', they are implicitly enclosed in a
`parallel'. Then you must explicitly write the `parallel', and the
square brackets within it, in the `define_peephole'. Thus, if an insn
pattern looks like this,
(define_insn "divmodsi4"
[(set (match_operand:SI 0 "general_operand" "=d")
(div:SI (match_operand:SI 1 "general_operand" "0")
(match_operand:SI 2 "general_operand" "dmsK")))
(set (match_operand:SI 3 "general_operand" "=d")
(mod:SI (match_dup 1) (match_dup 2)))]
"TARGET_68020"
"divsl%.l %2,%3:%0")
then the way to mention this insn in a peephole is as follows:
(define_peephole
[...
(parallel
[(set (match_operand:SI 0 "general_operand" "=d")
(div:SI (match_operand:SI 1 "general_operand" "0")
(match_operand:SI 2 "general_operand" "dmsK")))
(set (match_operand:SI 3 "general_operand" "=d")
(mod:SI (match_dup 1) (match_dup 2)))])
...]
...)

File: gcc.info, Node: Expander Definitions, Next: Insn Splitting, Prev: Peephole Definitions, Up: Machine Desc
Defining RTL Sequences for Code Generation
==========================================
On some target machines, some standard pattern names for RTL
generation cannot be handled with single insn, but a sequence of RTL
insns can represent them. For these target machines, you can write a
`define_expand' to specify how to generate the sequence of RTL.
A `define_expand' is an RTL expression that looks almost like a
`define_insn'; but, unlike the latter, a `define_expand' is used only
for RTL generation and it can produce more than one RTL insn.
A `define_expand' RTX has four operands:
* The name. Each `define_expand' must have a name, since the only
use for it is to refer to it by name.
* The RTL template. This is just like the RTL template for a
`define_peephole' in that it is a vector of RTL expressions each
being one insn.
* The condition, a string containing a C expression. This
expression is used to express how the availability of this pattern
depends on subclasses of target machine, selected by command-line
options when GNU CC is run. This is just like the condition of a
`define_insn' that has a standard name. Therefore, the condition
(if present) may not depend on the data in the insn being matched,
but only the target-machine-type flags. The compiler needs to
test these conditions during initialization in order to learn
exactly which named instructions are available in a particular run.
* The preparation statements, a string containing zero or more C
statements which are to be executed before RTL code is generated
from the RTL template.
Usually these statements prepare temporary registers for use as
internal operands in the RTL template, but they can also generate
RTL insns directly by calling routines such as `emit_insn', etc.
Any such insns precede the ones that come from the RTL template.
Every RTL insn emitted by a `define_expand' must match some
`define_insn' in the machine description. Otherwise, the compiler will
crash when trying to generate code for the insn or trying to optimize
it.
The RTL template, in addition to controlling generation of RTL insns,
also describes the operands that need to be specified when this pattern
is used. In particular, it gives a predicate for each operand.
A true operand, which needs to be specified in order to generate RTL
from the pattern, should be described with a `match_operand' in its
first occurrence in the RTL template. This enters information on the
operand's predicate into the tables that record such things. GNU CC
uses the information to preload the operand into a register if that is
required for valid RTL code. If the operand is referred to more than
once, subsequent references should use `match_dup'.
The RTL template may also refer to internal "operands" which are
temporary registers or labels used only within the sequence made by the
`define_expand'. Internal operands are substituted into the RTL
template with `match_dup', never with `match_operand'. The values of
the internal operands are not passed in as arguments by the compiler
when it requests use of this pattern. Instead, they are computed
within the pattern, in the preparation statements. These statements
compute the values and store them into the appropriate elements of
`operands' so that `match_dup' can find them.
There are two special macros defined for use in the preparation
statements: `DONE' and `FAIL'. Use them with a following semicolon, as
a statement.
`DONE'
Use the `DONE' macro to end RTL generation for the pattern. The
only RTL insns resulting from the pattern on this occasion will be
those already emitted by explicit calls to `emit_insn' within the
preparation statements; the RTL template will not be generated.
`FAIL'
Make the pattern fail on this occasion. When a pattern fails, it
means that the pattern was not truly available. The calling
routines in the compiler will try other strategies for code
generation using other patterns.
Failure is currently supported only for binary (addition,
multiplication, shifting, etc.) and bitfield (`extv', `extzv', and
`insv') operations.
Here is an example, the definition of left-shift for the SPUR chip:
(define_expand "ashlsi3"
[(set (match_operand:SI 0 "register_operand" "")
(ashift:SI
(match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "nonmemory_operand" "")))]
""
"
{
if (GET_CODE (operands[2]) != CONST_INT
|| (unsigned) INTVAL (operands[2]) > 3)
FAIL;
}")
This example uses `define_expand' so that it can generate an RTL insn
for shifting when the shift-count is in the supported range of 0 to 3
but fail in other cases where machine insns aren't available. When it
fails, the compiler tries another strategy using different patterns
(such as, a library call).
If the compiler were able to handle nontrivial condition-strings in
patterns with names, then it would be possible to use a `define_insn'
in that case. Here is another case (zero-extension on the 68000) which
makes more use of the power of `define_expand':
(define_expand "zero_extendhisi2"
[(set (match_operand:SI 0 "general_operand" "")
(const_int 0))
(set (strict_low_part
(subreg:HI
(match_dup 0)
0))
(match_operand:HI 1 "general_operand" ""))]
""
"operands[1] = make_safe_from (operands[1], operands[0]);")
Here two RTL insns are generated, one to clear the entire output operand
and the other to copy the input operand into its low half. This
sequence is incorrect if the input operand refers to [the old value of]
the output operand, so the preparation statement makes sure this isn't
so. The function `make_safe_from' copies the `operands[1]' into a
temporary register if it refers to `operands[0]'. It does this by
emitting another RTL insn.
Finally, a third example shows the use of an internal operand.
Zero-extension on the SPUR chip is done by `and'-ing the result against
a halfword mask. But this mask cannot be represented by a `const_int'
because the constant value is too large to be legitimate on this
machine. So it must be copied into a register with `force_reg' and
then the register used in the `and'.
(define_expand "zero_extendhisi2"
[(set (match_operand:SI 0 "register_operand" "")
(and:SI (subreg:SI
(match_operand:HI 1 "register_operand" "")
0)
(match_dup 2)))]
""
"operands[2]
= force_reg (SImode, GEN_INT (65535)); ")
*Note:* If the `define_expand' is used to serve a standard binary or
unary arithmetic operation or a bitfield operation, then the last insn
it generates must not be a `code_label', `barrier' or `note'. It must
be an `insn', `jump_insn' or `call_insn'. If you don't need a real insn
at the end, emit an insn to copy the result of the operation into
itself. Such an insn will generate no code, but it can avoid problems
in the compiler.

File: gcc.info, Node: Insn Splitting, Next: Insn Attributes, Prev: Expander Definitions, Up: Machine Desc
Defining How to Split Instructions
==================================
There are two cases where you should specify how to split a pattern
into multiple insns. On machines that have instructions requiring delay
slots (*note Delay Slots::.) or that have instructions whose output is
not available for multiple cycles (*note Function Units::.), the
compiler phases that optimize these cases need to be able to move insns
into one-instruction delay slots. However, some insns may generate
more than one machine instruction. These insns cannot be placed into a
delay slot.
Often you can rewrite the single insn as a list of individual insns,
each corresponding to one machine instruction. The disadvantage of
doing so is that it will cause the compilation to be slower and require
more space. If the resulting insns are too complex, it may also
suppress some optimizations. The compiler splits the insn if there is a
reason to believe that it might improve instruction or delay slot
scheduling.
The insn combiner phase also splits putative insns. If three insns
are merged into one insn with a complex expression that cannot be
matched by some `define_insn' pattern, the combiner phase attempts to
split the complex pattern into two insns that are recognized. Usually
it can break the complex pattern into two patterns by splitting out some
subexpression. However, in some other cases, such as performing an
addition of a large constant in two insns on a RISC machine, the way to
split the addition into two insns is machine-dependent.
The `define_split' definition tells the compiler how to split a
complex insn into several simpler insns. It looks like this:
(define_split
[INSN-PATTERN]
"CONDITION"
[NEW-INSN-PATTERN-1
NEW-INSN-PATTERN-2
...]
"PREPARATION STATEMENTS")
INSN-PATTERN is a pattern that needs to be split and CONDITION is
the final condition to be tested, as in a `define_insn'. When an insn
matching INSN-PATTERN and satisfying CONDITION is found, it is replaced
in the insn list with the insns given by NEW-INSN-PATTERN-1,
NEW-INSN-PATTERN-2, etc.
The PREPARATION STATEMENTS are similar to those statements that are
specified for `define_expand' (*note Expander Definitions::.) and are
executed before the new RTL is generated to prepare for the generated
code or emit some insns whose pattern is not fixed. Unlike those in
`define_expand', however, these statements must not generate any new
pseudo-registers. Once reload has completed, they also must not
allocate any space in the stack frame.
Patterns are matched against INSN-PATTERN in two different
circumstances. If an insn needs to be split for delay slot scheduling
or insn scheduling, the insn is already known to be valid, which means
that it must have been matched by some `define_insn' and, if
`reload_completed' is non-zero, is known to satisfy the constraints of
that `define_insn'. In that case, the new insn patterns must also be
insns that are matched by some `define_insn' and, if `reload_completed'
is non-zero, must also satisfy the constraints of those definitions.
As an example of this usage of `define_split', consider the following
example from `a29k.md', which splits a `sign_extend' from `HImode' to
`SImode' into a pair of shift insns:
(define_split
[(set (match_operand:SI 0 "gen_reg_operand" "")
(sign_extend:SI (match_operand:HI 1 "gen_reg_operand" "")))]
""
[(set (match_dup 0)
(ashift:SI (match_dup 1)
(const_int 16)))
(set (match_dup 0)
(ashiftrt:SI (match_dup 0)
(const_int 16)))]
"
{ operands[1] = gen_lowpart (SImode, operands[1]); }")
When the combiner phase tries to split an insn pattern, it is always
the case that the pattern is *not* matched by any `define_insn'. The
combiner pass first tries to split a single `set' expression and then
the same `set' expression inside a `parallel', but followed by a
`clobber' of a pseudo-reg to use as a scratch register. In these
cases, the combiner expects exactly two new insn patterns to be
generated. It will verify that these patterns match some `define_insn'
definitions, so you need not do this test in the `define_split' (of
course, there is no point in writing a `define_split' that will never
produce insns that match).
Here is an example of this use of `define_split', taken from
`rs6000.md':
(define_split
[(set (match_operand:SI 0 "gen_reg_operand" "")
(plus:SI (match_operand:SI 1 "gen_reg_operand" "")
(match_operand:SI 2 "non_add_cint_operand" "")))]
""
[(set (match_dup 0) (plus:SI (match_dup 1) (match_dup 3)))
(set (match_dup 0) (plus:SI (match_dup 0) (match_dup 4)))]
"
{
int low = INTVAL (operands[2]) & 0xffff;
int high = (unsigned) INTVAL (operands[2]) >> 16;
if (low & 0x8000)
high++, low |= 0xffff0000;
operands[3] = GEN_INT (high << 16);
operands[4] = GEN_INT (low);
}")
Here the predicate `non_add_cint_operand' matches any `const_int'
that is *not* a valid operand of a single add insn. The add with the
smaller displacement is written so that it can be substituted into the
address of a subsequent operation.
An example that uses a scratch register, from the same file,
generates an equality comparison of a register and a large constant:
(define_split
[(set (match_operand:CC 0 "cc_reg_operand" "")
(compare:CC (match_operand:SI 1 "gen_reg_operand" "")
(match_operand:SI 2 "non_short_cint_operand" "")))
(clobber (match_operand:SI 3 "gen_reg_operand" ""))]
"find_single_use (operands[0], insn, 0)
&& (GET_CODE (*find_single_use (operands[0], insn, 0)) == EQ
|| GET_CODE (*find_single_use (operands[0], insn, 0)) == NE)"
[(set (match_dup 3) (xor:SI (match_dup 1) (match_dup 4)))
(set (match_dup 0) (compare:CC (match_dup 3) (match_dup 5)))]
"
{
/* Get the constant we are comparing against, C, and see what it
looks like sign-extended to 16 bits. Then see what constant
could be XOR'ed with C to get the sign-extended value. */
int c = INTVAL (operands[2]);
int sextc = (c << 16) >> 16;
int xorv = c ^ sextc;
operands[4] = GEN_INT (xorv);
operands[5] = GEN_INT (sextc);
}")
To avoid confusion, don't write a single `define_split' that accepts
some insns that match some `define_insn' as well as some insns that
don't. Instead, write two separate `define_split' definitions, one for
the insns that are valid and one for the insns that are not valid.

File: gcc.info, Node: Insn Attributes, Prev: Insn Splitting, Up: Machine Desc
Instruction Attributes
======================
In addition to describing the instruction supported by the target
machine, the `md' file also defines a group of "attributes" and a set of
values for each. Every generated insn is assigned a value for each
attribute. One possible attribute would be the effect that the insn
has on the machine's condition code. This attribute can then be used
by `NOTICE_UPDATE_CC' to track the condition codes.
* Menu:
* Defining Attributes:: Specifying attributes and their values.
* Expressions:: Valid expressions for attribute values.
* Tagging Insns:: Assigning attribute values to insns.
* Attr Example:: An example of assigning attributes.
* Insn Lengths:: Computing the length of insns.
* Constant Attributes:: Defining attributes that are constant.
* Delay Slots:: Defining delay slots required for a machine.
* Function Units:: Specifying information for insn scheduling.

File: gcc.info, Node: Defining Attributes, Next: Expressions, Up: Insn Attributes
Defining Attributes and their Values
------------------------------------
The `define_attr' expression is used to define each attribute
required by the target machine. It looks like:
(define_attr NAME LIST-OF-VALUES DEFAULT)
NAME is a string specifying the name of the attribute being defined.
LIST-OF-VALUES is either a string that specifies a comma-separated
list of values that can be assigned to the attribute, or a null string
to indicate that the attribute takes numeric values.
DEFAULT is an attribute expression that gives the value of this
attribute for insns that match patterns whose definition does not
include an explicit value for this attribute. *Note Attr Example::,
for more information on the handling of defaults. *Note Constant
Attributes::, for information on attributes that do not depend on any
particular insn.
For each defined attribute, a number of definitions are written to
the `insn-attr.h' file. For cases where an explicit set of values is
specified for an attribute, the following are defined:
* A `#define' is written for the symbol `HAVE_ATTR_NAME'.
* An enumeral class is defined for `attr_NAME' with elements of the
form `UPPER-NAME_UPPER-VALUE' where the attribute name and value
are first converted to upper case.
* A function `get_attr_NAME' is defined that is passed an insn and
returns the attribute value for that insn.
For example, if the following is present in the `md' file:
(define_attr "type" "branch,fp,load,store,arith" ...)
the following lines will be written to the file `insn-attr.h'.
#define HAVE_ATTR_type
enum attr_type {TYPE_BRANCH, TYPE_FP, TYPE_LOAD,
TYPE_STORE, TYPE_ARITH};
extern enum attr_type get_attr_type ();
If the attribute takes numeric values, no `enum' type will be
defined and the function to obtain the attribute's value will return
`int'.

File: gcc.info, Node: Expressions, Next: Tagging Insns, Prev: Defining Attributes, Up: Insn Attributes
Attribute Expressions
---------------------
RTL expressions used to define attributes use the codes described
above plus a few specific to attribute definitions, to be discussed
below. Attribute value expressions must have one of the following
forms:
`(const_int I)'
The integer I specifies the value of a numeric attribute. I must
be non-negative.
The value of a numeric attribute can be specified either with a
`const_int', or as an integer represented as a string in
`const_string', `eq_attr' (see below), `attr', `symbol_ref',
simple arithmetic expressions, and `set_attr' overrides on
specific instructions (*note Tagging Insns::.).
`(const_string VALUE)'
The string VALUE specifies a constant attribute value. If VALUE
is specified as `"*"', it means that the default value of the
attribute is to be used for the insn containing this expression.
`"*"' obviously cannot be used in the DEFAULT expression of a
`define_attr'.
If the attribute whose value is being specified is numeric, VALUE
must be a string containing a non-negative integer (normally
`const_int' would be used in this case). Otherwise, it must
contain one of the valid values for the attribute.
`(if_then_else TEST TRUE-VALUE FALSE-VALUE)'
TEST specifies an attribute test, whose format is defined below.
The value of this expression is TRUE-VALUE if TEST is true,
otherwise it is FALSE-VALUE.
`(cond [TEST1 VALUE1 ...] DEFAULT)'
The first operand of this expression is a vector containing an even
number of expressions and consisting of pairs of TEST and VALUE
expressions. The value of the `cond' expression is that of the
VALUE corresponding to the first true TEST expression. If none of
the TEST expressions are true, the value of the `cond' expression
is that of the DEFAULT expression.
TEST expressions can have one of the following forms:
`(const_int I)'
This test is true if I is non-zero and false otherwise.
`(not TEST)'
`(ior TEST1 TEST2)'
`(and TEST1 TEST2)'
These tests are true if the indicated logical function is true.
`(match_operand:M N PRED CONSTRAINTS)'
This test is true if operand N of the insn whose attribute value
is being determined has mode M (this part of the test is ignored
if M is `VOIDmode') and the function specified by the string PRED
returns a non-zero value when passed operand N and mode M (this
part of the test is ignored if PRED is the null string).
The CONSTRAINTS operand is ignored and should be the null string.
`(le ARITH1 ARITH2)'
`(leu ARITH1 ARITH2)'
`(lt ARITH1 ARITH2)'
`(ltu ARITH1 ARITH2)'
`(gt ARITH1 ARITH2)'
`(gtu ARITH1 ARITH2)'
`(ge ARITH1 ARITH2)'
`(geu ARITH1 ARITH2)'
`(ne ARITH1 ARITH2)'
`(eq ARITH1 ARITH2)'
These tests are true if the indicated comparison of the two
arithmetic expressions is true. Arithmetic expressions are formed
with `plus', `minus', `mult', `div', `mod', `abs', `neg', `and',
`ior', `xor', `not', `ashift', `lshiftrt', and `ashiftrt'
expressions.
`const_int' and `symbol_ref' are always valid terms (*note Insn
Lengths::.,for additional forms). `symbol_ref' is a string
denoting a C expression that yields an `int' when evaluated by the
`get_attr_...' routine. It should normally be a global variable.
`(eq_attr NAME VALUE)'
NAME is a string specifying the name of an attribute.
VALUE is a string that is either a valid value for attribute NAME,
a comma-separated list of values, or `!' followed by a value or
list. If VALUE does not begin with a `!', this test is true if
the value of the NAME attribute of the current insn is in the list
specified by VALUE. If VALUE begins with a `!', this test is true
if the attribute's value is *not* in the specified list.
For example,
(eq_attr "type" "load,store")
is equivalent to
(ior (eq_attr "type" "load") (eq_attr "type" "store"))
If NAME specifies an attribute of `alternative', it refers to the
value of the compiler variable `which_alternative' (*note Output
Statement::.) and the values must be small integers. For example,
(eq_attr "alternative" "2,3")
is equivalent to
(ior (eq (symbol_ref "which_alternative") (const_int 2))
(eq (symbol_ref "which_alternative") (const_int 3)))
Note that, for most attributes, an `eq_attr' test is simplified in
cases where the value of the attribute being tested is known for
all insns matching a particular pattern. This is by far the most
common case.
`(attr_flag NAME)'
The value of an `attr_flag' expression is true if the flag
specified by NAME is true for the `insn' currently being scheduled.
NAME is a string specifying one of a fixed set of flags to test.
Test the flags `forward' and `backward' to determine the direction
of a conditional branch. Test the flags `very_likely', `likely',
`very_unlikely', and `unlikely' to determine if a conditional
branch is expected to be taken.
If the `very_likely' flag is true, then the `likely' flag is also
true. Likewise for the `very_unlikely' and `unlikely' flags.
This example describes a conditional branch delay slot which can
be nullified for forward branches that are taken (annul-true) or
for backward branches which are not taken (annul-false).
(define_delay (eq_attr "type" "cbranch")
[(eq_attr "in_branch_delay" "true")
(and (eq_attr "in_branch_delay" "true")
(attr_flag "forward"))
(and (eq_attr "in_branch_delay" "true")
(attr_flag "backward"))])
The `forward' and `backward' flags are false if the current `insn'
being scheduled is not a conditional branch.
The `very_likely' and `likely' flags are true if the `insn' being
scheduled is not a conditional branch. The `very_unlikely' and
`unlikely' flags are false if the `insn' being scheduled is not a
conditional branch.
`attr_flag' is only used during delay slot scheduling and has no
meaning to other passes of the compiler.
`(attr NAME)'
The value of another attribute is returned. This is most useful
for numeric attributes, as `eq_attr' and `attr_flag' produce more
efficient code for non-numeric attributes.

File: gcc.info, Node: Tagging Insns, Next: Attr Example, Prev: Expressions, Up: Insn Attributes
Assigning Attribute Values to Insns
-----------------------------------
The value assigned to an attribute of an insn is primarily
determined by which pattern is matched by that insn (or which
`define_peephole' generated it). Every `define_insn' and
`define_peephole' can have an optional last argument to specify the
values of attributes for matching insns. The value of any attribute
not specified in a particular insn is set to the default value for that
attribute, as specified in its `define_attr'. Extensive use of default
values for attributes permits the specification of the values for only
one or two attributes in the definition of most insn patterns, as seen
in the example in the next section.
The optional last argument of `define_insn' and `define_peephole' is
a vector of expressions, each of which defines the value for a single
attribute. The most general way of assigning an attribute's value is
to use a `set' expression whose first operand is an `attr' expression
giving the name of the attribute being set. The second operand of the
`set' is an attribute expression (*note Expressions::.) giving the
value of the attribute.
When the attribute value depends on the `alternative' attribute
(i.e., which is the applicable alternative in the constraint of the
insn), the `set_attr_alternative' expression can be used. It allows
the specification of a vector of attribute expressions, one for each
alternative.
When the generality of arbitrary attribute expressions is not
required, the simpler `set_attr' expression can be used, which allows
specifying a string giving either a single attribute value or a list of
attribute values, one for each alternative.
The form of each of the above specifications is shown below. In
each case, NAME is a string specifying the attribute to be set.
`(set_attr NAME VALUE-STRING)'
VALUE-STRING is either a string giving the desired attribute value,
or a string containing a comma-separated list giving the values for
succeeding alternatives. The number of elements must match the
number of alternatives in the constraint of the insn pattern.
Note that it may be useful to specify `*' for some alternative, in
which case the attribute will assume its default value for insns
matching that alternative.
`(set_attr_alternative NAME [VALUE1 VALUE2 ...])'
Depending on the alternative of the insn, the value will be one of
the specified values. This is a shorthand for using a `cond' with
tests on the `alternative' attribute.
`(set (attr NAME) VALUE)'
The first operand of this `set' must be the special RTL expression
`attr', whose sole operand is a string giving the name of the
attribute being set. VALUE is the value of the attribute.
The following shows three different ways of representing the same
attribute value specification:
(set_attr "type" "load,store,arith")
(set_attr_alternative "type"
[(const_string "load") (const_string "store")
(const_string "arith")])
(set (attr "type")
(cond [(eq_attr "alternative" "1") (const_string "load")
(eq_attr "alternative" "2") (const_string "store")]
(const_string "arith")))
The `define_asm_attributes' expression provides a mechanism to
specify the attributes assigned to insns produced from an `asm'
statement. It has the form:
(define_asm_attributes [ATTR-SETS])
where ATTR-SETS is specified the same as for both the `define_insn' and
the `define_peephole' expressions.
These values will typically be the "worst case" attribute values.
For example, they might indicate that the condition code will be
clobbered.
A specification for a `length' attribute is handled specially. The
way to compute the length of an `asm' insn is to multiply the length
specified in the expression `define_asm_attributes' by the number of
machine instructions specified in the `asm' statement, determined by
counting the number of semicolons and newlines in the string.
Therefore, the value of the `length' attribute specified in a
`define_asm_attributes' should be the maximum possible length of a
single machine instruction.

File: gcc.info, Node: Attr Example, Next: Insn Lengths, Prev: Tagging Insns, Up: Insn Attributes
Example of Attribute Specifications
-----------------------------------
The judicious use of defaulting is important in the efficient use of
insn attributes. Typically, insns are divided into "types" and an
attribute, customarily called `type', is used to represent this value.
This attribute is normally used only to define the default value for
other attributes. An example will clarify this usage.
Assume we have a RISC machine with a condition code and in which only
full-word operations are performed in registers. Let us assume that we
can divide all insns into loads, stores, (integer) arithmetic
operations, floating point operations, and branches.
Here we will concern ourselves with determining the effect of an
insn on the condition code and will limit ourselves to the following
possible effects: The condition code can be set unpredictably
(clobbered), not be changed, be set to agree with the results of the
operation, or only changed if the item previously set into the
condition code has been modified.
Here is part of a sample `md' file for such a machine:
(define_attr "type" "load,store,arith,fp,branch" (const_string "arith"))
(define_attr "cc" "clobber,unchanged,set,change0"
(cond [(eq_attr "type" "load")
(const_string "change0")
(eq_attr "type" "store,branch")
(const_string "unchanged")
(eq_attr "type" "arith")
(if_then_else (match_operand:SI 0 "" "")
(const_string "set")
(const_string "clobber"))]
(const_string "clobber")))
(define_insn ""
[(set (match_operand:SI 0 "general_operand" "=r,r,m")
(match_operand:SI 1 "general_operand" "r,m,r"))]
""
"@
move %0,%1
load %0,%1
store %0,%1"
[(set_attr "type" "arith,load,store")])
Note that we assume in the above example that arithmetic operations
performed on quantities smaller than a machine word clobber the
condition code since they will set the condition code to a value
corresponding to the full-word result.
Reference in New Issue View Git Blame Copy Permalink